Seperation

RM 0.00

Stuart Laboratory Water Still, 4 L/hr

0 out of 5
(0)
SKU: N/A
  • Economical price
  • Glass construction with long life metal heating element
  • Two independent safety thermostats
  • Wall mountable, features a sturdy metal stand for either wall or bench mounting
  • Reliable, easy to use, and safe to clean
  • Operate directly from tap water
  • This versatile water still is perfect for general laboratory distillations.
  • Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware
  • Features a waste water drain below the level of the still connect your drain pipe from the boiler straight downward without troublesome bends that may slow the flow rate
  • Boiler and high-efficiency condenser are both constructed of borosilicate glass to ensure the highest in distillate purity.
  • Heater is chromium plated and provides protection from overheating.
  • Condenser features screw thread connections and plastic 3/8″ ID hose barb fittings- change tubing quickly and safely without worrying about using excessive force on the glass.
Model99293-00
Output4 litres/hr, single distilled
pH5.0-6.5
Conductivity, uScm-13.0-4.0
Resistivity, mOhm-cm0.25 – 0.3
Temperature25 -35°c
Pyrogen contentPyrogen free
Water supply1 litre/min, 3-100 psi (20 – 700 kPa)
Dimension, mm (W x D x H)500 x 150 x 450
Power requirement3kW
Electrical supply220V or 24oV, 50-60Hz, single phase

 

Add to CartCompare

Stuart Laboratory Water Still, 4 L/hr

0 out of 5
(0)
  • Economical price
  • Glass construction with long life metal heating element
  • Two independent safety thermostats
  • Wall mountable, features a sturdy metal stand for either wall or bench mounting
  • Reliable, easy to use, and safe to clean
  • Operate directly from tap water
  • This versatile water still is perfect for general laboratory distillations.
  • Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware
  • Features a waste water drain below the level of the still connect your drain pipe from the boiler straight downward without troublesome bends that may slow the flow rate
  • Boiler and high-efficiency condenser are both constructed of borosilicate glass to ensure the highest in distillate purity.
  • Heater is chromium plated and provides protection from overheating.
  • Condenser features screw thread connections and plastic 3/8″ ID hose barb fittings- change tubing quickly and safely without worrying about using excessive force on the glass.
Model99293-00
Output4 litres/hr, single distilled
pH5.0-6.5
Conductivity, uScm-13.0-4.0
Resistivity, mOhm-cm0.25 – 0.3
Temperature25 -35°c
Pyrogen contentPyrogen free
Water supply1 litre/min, 3-100 psi (20 – 700 kPa)
Dimension, mm (W x D x H)500 x 150 x 450
Power requirement3kW
Electrical supply220V or 24oV, 50-60Hz, single phase

 

SKU: N/A

Stuart Laboratory Water Still, 4 L/hr

0 out of 5
(0)
  • Economical price
  • Glass construction with long life metal heating element
  • Two independent safety thermostats
  • Wall mountable, features a sturdy metal stand for either wall or bench mounting
  • Reliable, easy to use, and safe to clean
  • Operate directly from tap water
  • This versatile water still is perfect for general laboratory distillations.
  • Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware
  • Features a waste water drain below the level of the still connect your drain pipe from the boiler straight downward without troublesome bends that may slow the flow rate
  • Boiler and high-efficiency condenser are both constructed of borosilicate glass to ensure the highest in distillate purity.
  • Heater is chromium plated and provides protection from overheating.
  • Condenser features screw thread connections and plastic 3/8″ ID hose barb fittings- change tubing quickly and safely without worrying about using excessive force on the glass.
Model99293-00
Output4 litres/hr, single distilled
pH5.0-6.5
Conductivity, uScm-13.0-4.0
Resistivity, mOhm-cm0.25 – 0.3
Temperature25 -35°c
Pyrogen contentPyrogen free
Water supply1 litre/min, 3-100 psi (20 – 700 kPa)
Dimension, mm (W x D x H)500 x 150 x 450
Power requirement3kW
Electrical supply220V or 24oV, 50-60Hz, single phase

 

Stuart Laboratory Water Still, 4 L/hr

0 out of 5
(0)
  • Economical price
  • Glass construction with long life metal heating element
  • Two independent safety thermostats
  • Wall mountable, features a sturdy metal stand for either wall or bench mounting
  • Reliable, easy to use, and safe to clean
  • Operate directly from tap water
  • This versatile water still is perfect for general laboratory distillations.
  • Built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware
  • Features a waste water drain below the level of the still connect your drain pipe from the boiler straight downward without troublesome bends that may slow the flow rate
  • Boiler and high-efficiency condenser are both constructed of borosilicate glass to ensure the highest in distillate purity.
  • Heater is chromium plated and provides protection from overheating.
  • Condenser features screw thread connections and plastic 3/8″ ID hose barb fittings- change tubing quickly and safely without worrying about using excessive force on the glass.
Model99293-00
Output4 litres/hr, single distilled
pH5.0-6.5
Conductivity, uScm-13.0-4.0
Resistivity, mOhm-cm0.25 – 0.3
Temperature25 -35°c
Pyrogen contentPyrogen free
Water supply1 litre/min, 3-100 psi (20 – 700 kPa)
Dimension, mm (W x D x H)500 x 150 x 450
Power requirement3kW
Electrical supply220V or 24oV, 50-60Hz, single phase

 

Showing the single result

seo by bcz