No products in the cart.
AEMC Cable Testers
SKU: N/A- Fault Mapper
Cable Length Meter and Fault Locator Alphanumeric TDR – AE212780 - Handheld cable length meter and fault locator
- Detects opens and shorts and
- the distance to them from one end of the cable
- Measure cable length up to 6000 ft or 2000m (selectable)
- Automatic cable impedance compensation
- Built-in library of most common cables and their Velocity of Propagation (Vp)
- Manual selection of Vp for all cables not found in library
- User programmable cable library with 15 positions
- Vp setting displayed along with length and cable type (if in library)
- Built-in tone generator for tracing and locating cables
- Large high-visibility blue electroluminescent backlit display
B&K Precision 231A Deluxe Multi-Network Cable Tester
SKU: N/AMulti-Network Cable Testers
Multi-Network Cable Tester tests thin Ethernet (BNC), 10BaseT (UTP/STP),100BaseTx, RJ45, TIA-568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. Also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or patch panel.
- Auto scans thin Ethernet (BNC),10Base T (UTP/STP), 100BaseTx, RJ45,356A, TIA-568A, TIA-568B, and Token Ring cables in seconds
- Detects miswiring, polarization, and continuity
- Also tests the ground of shielded twisted pair cables
- Tests cables before or after installation with the remote unit
- LED display for clear indication of problems
- Protective rubber boot
- Belt clip
B&K Precision 844USB EPROM Device Programmer
SKU: N/ABP352125
- Small, fast and powerful programmer
- 40 pin DIP ZIF socket, no adapter required for device in DIP package
up to 40 pins - In-circuit serial programming (ISP) capability included
- High-speed IEEE 1284 printer-port interface, up to 1MB/sec. Transfer rate
ETCON WL140 Wire Length Meter with Leads
SKU: N/AMeasures any reel of wire from 24 AWG to 1000MCM stranded and solid in lengths of 15ft to 20,000ft. The unit is useful for electrical contractors, utilities and distributors for determining inventories of wire. The operator selects gauge, aught or MCM mode, selects copper or aluminum mode, attaches the alligator clips to the ends of the wire being measured, and presses {length} button to determine the length of wire.
Extech 40180 Tone Generator and Amplifier Probe Kit
SKU: N/AEasily find cables and wires or check telephone lines
- Alligator clips and modular connectors let you check different types of wiring
- Insulated inductive probe prevents conductor shorting
- Built-in speaker and colored LEDs provide easy-to-interpret results
- Perform wire trace, continuity, clear/busy/ringing and tip/ring tests
Extech CT40 16 Line Identifier/Tester Kit
SKU: N/AIdentify up to 16 local or installed lines and troubleshoot electrical/electronic circuits
- Transmitter/receiver enables one person to remotely identify up to 16 wires
- Wire voltage check from 5 to 16 VDC
- MultiMeter functions include: AC/DC voltage and current, resistance, diode, and continuity
- Data hold and max hold
- Auto power off
Extech TG20 Wire Tracer and Tone Generator
SKU: N/AQuickly trace wires, check for breaks, and test phone lines
- Check electrical and telephone wiring with alligator clips and RJ11 connector
- Insulated probe protects conductors
- Easily interpret results using built-in speaker and colored LEDs
- Trace cables or test for continuity, tip/ring, and telephone line condition
Fisher M-101 Rebar Locator W-Probe Case And Harness
SKU: N/AThis metal detector was designed specially for finding reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring, wall studs and other metallic objects. Users may expect accuracy to 1/4” of the center line of the rebar.
Fisher TW-6 Labs , Pipe and Cable Locator
SKU: N/AThe well known M-Scope Model TW-5 Pipe and Cable Locator has been upgraded in performance and user friendliness to the Model TW-6. The new model performs the traditional finding tasks of locating underground metal objects such as pipes, cables, manhole covers, vaults and valve boxes.
AEMC Cable Testers
- Fault Mapper
Cable Length Meter and Fault Locator Alphanumeric TDR – AE212780 - Handheld cable length meter and fault locator
- Detects opens and shorts and
- the distance to them from one end of the cable
- Measure cable length up to 6000 ft or 2000m (selectable)
- Automatic cable impedance compensation
- Built-in library of most common cables and their Velocity of Propagation (Vp)
- Manual selection of Vp for all cables not found in library
- User programmable cable library with 15 positions
- Vp setting displayed along with length and cable type (if in library)
- Built-in tone generator for tracing and locating cables
- Large high-visibility blue electroluminescent backlit display
B&K Precision 231A Deluxe Multi-Network Cable Tester
Multi-Network Cable Testers
Multi-Network Cable Tester tests thin Ethernet (BNC), 10BaseT (UTP/STP),100BaseTx, RJ45, TIA-568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. Also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or patch panel.
- Auto scans thin Ethernet (BNC),10Base T (UTP/STP), 100BaseTx, RJ45,356A, TIA-568A, TIA-568B, and Token Ring cables in seconds
- Detects miswiring, polarization, and continuity
- Also tests the ground of shielded twisted pair cables
- Tests cables before or after installation with the remote unit
- LED display for clear indication of problems
- Protective rubber boot
- Belt clip
B&K Precision 844USB EPROM Device Programmer
BP352125
- Small, fast and powerful programmer
- 40 pin DIP ZIF socket, no adapter required for device in DIP package
up to 40 pins - In-circuit serial programming (ISP) capability included
- High-speed IEEE 1284 printer-port interface, up to 1MB/sec. Transfer rate
ETCON WL140 Wire Length Meter with Leads
Measures any reel of wire from 24 AWG to 1000MCM stranded and solid in lengths of 15ft to 20,000ft. The unit is useful for electrical contractors, utilities and distributors for determining inventories of wire. The operator selects gauge, aught or MCM mode, selects copper or aluminum mode, attaches the alligator clips to the ends of the wire being measured, and presses {length} button to determine the length of wire.
Extech 40180 Tone Generator and Amplifier Probe Kit
Easily find cables and wires or check telephone lines
- Alligator clips and modular connectors let you check different types of wiring
- Insulated inductive probe prevents conductor shorting
- Built-in speaker and colored LEDs provide easy-to-interpret results
- Perform wire trace, continuity, clear/busy/ringing and tip/ring tests
Extech CT40 16 Line Identifier/Tester Kit
Identify up to 16 local or installed lines and troubleshoot electrical/electronic circuits
- Transmitter/receiver enables one person to remotely identify up to 16 wires
- Wire voltage check from 5 to 16 VDC
- MultiMeter functions include: AC/DC voltage and current, resistance, diode, and continuity
- Data hold and max hold
- Auto power off
Extech TG20 Wire Tracer and Tone Generator
Quickly trace wires, check for breaks, and test phone lines
- Check electrical and telephone wiring with alligator clips and RJ11 connector
- Insulated probe protects conductors
- Easily interpret results using built-in speaker and colored LEDs
- Trace cables or test for continuity, tip/ring, and telephone line condition
Fisher M-101 Rebar Locator W-Probe Case And Harness
This metal detector was designed specially for finding reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring, wall studs and other metallic objects. Users may expect accuracy to 1/4” of the center line of the rebar.
Fisher TW-6 Labs , Pipe and Cable Locator
The well known M-Scope Model TW-5 Pipe and Cable Locator has been upgraded in performance and user friendliness to the Model TW-6. The new model performs the traditional finding tasks of locating underground metal objects such as pipes, cables, manhole covers, vaults and valve boxes.
AEMC Cable Testers
- Fault Mapper
Cable Length Meter and Fault Locator Alphanumeric TDR – AE212780 - Handheld cable length meter and fault locator
- Detects opens and shorts and
- the distance to them from one end of the cable
- Measure cable length up to 6000 ft or 2000m (selectable)
- Automatic cable impedance compensation
- Built-in library of most common cables and their Velocity of Propagation (Vp)
- Manual selection of Vp for all cables not found in library
- User programmable cable library with 15 positions
- Vp setting displayed along with length and cable type (if in library)
- Built-in tone generator for tracing and locating cables
- Large high-visibility blue electroluminescent backlit display
B&K Precision 231A Deluxe Multi-Network Cable Tester
Multi-Network Cable Testers
Multi-Network Cable Tester tests thin Ethernet (BNC), 10BaseT (UTP/STP),100BaseTx, RJ45, TIA-568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. Also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or patch panel.
- Auto scans thin Ethernet (BNC),10Base T (UTP/STP), 100BaseTx, RJ45,356A, TIA-568A, TIA-568B, and Token Ring cables in seconds
- Detects miswiring, polarization, and continuity
- Also tests the ground of shielded twisted pair cables
- Tests cables before or after installation with the remote unit
- LED display for clear indication of problems
- Protective rubber boot
- Belt clip
B&K Precision 844USB EPROM Device Programmer
BP352125
- Small, fast and powerful programmer
- 40 pin DIP ZIF socket, no adapter required for device in DIP package
up to 40 pins - In-circuit serial programming (ISP) capability included
- High-speed IEEE 1284 printer-port interface, up to 1MB/sec. Transfer rate
ETCON WL140 Wire Length Meter with Leads
Measures any reel of wire from 24 AWG to 1000MCM stranded and solid in lengths of 15ft to 20,000ft. The unit is useful for electrical contractors, utilities and distributors for determining inventories of wire. The operator selects gauge, aught or MCM mode, selects copper or aluminum mode, attaches the alligator clips to the ends of the wire being measured, and presses {length} button to determine the length of wire.
Extech 40180 Tone Generator and Amplifier Probe Kit
Easily find cables and wires or check telephone lines
- Alligator clips and modular connectors let you check different types of wiring
- Insulated inductive probe prevents conductor shorting
- Built-in speaker and colored LEDs provide easy-to-interpret results
- Perform wire trace, continuity, clear/busy/ringing and tip/ring tests
Extech CT40 16 Line Identifier/Tester Kit
Identify up to 16 local or installed lines and troubleshoot electrical/electronic circuits
- Transmitter/receiver enables one person to remotely identify up to 16 wires
- Wire voltage check from 5 to 16 VDC
- MultiMeter functions include: AC/DC voltage and current, resistance, diode, and continuity
- Data hold and max hold
- Auto power off
Extech TG20 Wire Tracer and Tone Generator
Quickly trace wires, check for breaks, and test phone lines
- Check electrical and telephone wiring with alligator clips and RJ11 connector
- Insulated probe protects conductors
- Easily interpret results using built-in speaker and colored LEDs
- Trace cables or test for continuity, tip/ring, and telephone line condition
Fisher M-101 Rebar Locator W-Probe Case And Harness
This metal detector was designed specially for finding reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring, wall studs and other metallic objects. Users may expect accuracy to 1/4” of the center line of the rebar.
Fisher TW-6 Labs , Pipe and Cable Locator
The well known M-Scope Model TW-5 Pipe and Cable Locator has been upgraded in performance and user friendliness to the Model TW-6. The new model performs the traditional finding tasks of locating underground metal objects such as pipes, cables, manhole covers, vaults and valve boxes.
AEMC Cable Testers
- Fault Mapper
Cable Length Meter and Fault Locator Alphanumeric TDR – AE212780 - Handheld cable length meter and fault locator
- Detects opens and shorts and
- the distance to them from one end of the cable
- Measure cable length up to 6000 ft or 2000m (selectable)
- Automatic cable impedance compensation
- Built-in library of most common cables and their Velocity of Propagation (Vp)
- Manual selection of Vp for all cables not found in library
- User programmable cable library with 15 positions
- Vp setting displayed along with length and cable type (if in library)
- Built-in tone generator for tracing and locating cables
- Large high-visibility blue electroluminescent backlit display
B&K Precision 231A Deluxe Multi-Network Cable Tester
Multi-Network Cable Testers
Multi-Network Cable Tester tests thin Ethernet (BNC), 10BaseT (UTP/STP),100BaseTx, RJ45, TIA-568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. Also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or patch panel.
- Auto scans thin Ethernet (BNC),10Base T (UTP/STP), 100BaseTx, RJ45,356A, TIA-568A, TIA-568B, and Token Ring cables in seconds
- Detects miswiring, polarization, and continuity
- Also tests the ground of shielded twisted pair cables
- Tests cables before or after installation with the remote unit
- LED display for clear indication of problems
- Protective rubber boot
- Belt clip
B&K Precision 844USB EPROM Device Programmer
BP352125
- Small, fast and powerful programmer
- 40 pin DIP ZIF socket, no adapter required for device in DIP package
up to 40 pins - In-circuit serial programming (ISP) capability included
- High-speed IEEE 1284 printer-port interface, up to 1MB/sec. Transfer rate
ETCON WL140 Wire Length Meter with Leads
Measures any reel of wire from 24 AWG to 1000MCM stranded and solid in lengths of 15ft to 20,000ft. The unit is useful for electrical contractors, utilities and distributors for determining inventories of wire. The operator selects gauge, aught or MCM mode, selects copper or aluminum mode, attaches the alligator clips to the ends of the wire being measured, and presses {length} button to determine the length of wire.
Extech 40180 Tone Generator and Amplifier Probe Kit
Easily find cables and wires or check telephone lines
- Alligator clips and modular connectors let you check different types of wiring
- Insulated inductive probe prevents conductor shorting
- Built-in speaker and colored LEDs provide easy-to-interpret results
- Perform wire trace, continuity, clear/busy/ringing and tip/ring tests
Extech CT40 16 Line Identifier/Tester Kit
Identify up to 16 local or installed lines and troubleshoot electrical/electronic circuits
- Transmitter/receiver enables one person to remotely identify up to 16 wires
- Wire voltage check from 5 to 16 VDC
- MultiMeter functions include: AC/DC voltage and current, resistance, diode, and continuity
- Data hold and max hold
- Auto power off
Extech TG20 Wire Tracer and Tone Generator
Quickly trace wires, check for breaks, and test phone lines
- Check electrical and telephone wiring with alligator clips and RJ11 connector
- Insulated probe protects conductors
- Easily interpret results using built-in speaker and colored LEDs
- Trace cables or test for continuity, tip/ring, and telephone line condition
Fisher M-101 Rebar Locator W-Probe Case And Harness
This metal detector was designed specially for finding reinforcing bars and other metal objects embedded in concrete, conduits, PK nails, wiring, wall studs and other metallic objects. Users may expect accuracy to 1/4” of the center line of the rebar.
Fisher TW-6 Labs , Pipe and Cable Locator
The well known M-Scope Model TW-5 Pipe and Cable Locator has been upgraded in performance and user friendliness to the Model TW-6. The new model performs the traditional finding tasks of locating underground metal objects such as pipes, cables, manhole covers, vaults and valve boxes.
