
Slimline Pattern
SKU: N/AThis general purpose Max-min wall mounting thermometer offers a low cost instrument in an attractive style. Housed in a white plastic case printed with a white cover with concealed magnet at the lower part of the case enables the user to reset by simply sliding the over up and down, thus drawing the indices back to the mercury column. 210 x 50mm diameter. Supplied in cardboard carton.
Code | Range |
P3010 | -30/+50°C |
P3011 | -30/+50°C & -20/+120°F |

High Accuracy Pattern
SKU: N/AA short range high accuracy model with computer room and office environmental conditions in mind this white case instrument offers an accuracy of +/-0.25% @ 20°C. Wall mounting. 210 x 65mm.
- Code P3020 – Range 0-40°C

Giant Max-Min Thermometers
SKU: N/ASimilar in design to the ‘Slimline’ pattern this thermometer is probably the largest max-min available. Reset is again by use of the sliding cover at the lower part of the case. With dimensions of 513mm x 110mm it is very easy to read from a distance and is especially ideal for offices, factories, classrooms and gardens.
Code | Range |
P3030 | -30/+50°C |
P3031 | -30/+50°C & -20/+120°F |

Sixes Pattern Max-Min Thermometer
SKU: N/AThe case incorporates a lid and has a protection cover on the lower part, together with a hanging loop for the reset magnet. Supplied complete mounting screws. 260mm high x 60mm wide.
Code | Range |
P3000 | -30/+50°C |
P3001 | -30/+50°C & -20/+120°F |
P3002 | -10/100°C |
The push button version is a very similar instrument which has proved most popular in some markets. Similar in both design and construction a button situated in a centre of the scale enables the user to reset the indices without the need for a magnet.
Code | Range |
P3003 | -30/+50°C |
P3004 | -30/+50°C & -20/+120°F |

P1301 Pen-Type Stirring Stem Thermometer
SKU: N/AThe stainless steel probe is 125mm long with sensor located 10mm from the end. The protective sheath is made of Hi grade ABS plastic, with a vented end so the instrument can be used for stirring whilst taking the temperature. The probe protection sheath can also be clipped to the thermometer head to be used as a handle extension.
Features:
- Digital indication. Two push buttons with splash proof membrane.
- On/Off and Test/Data hold
- A third push button on rear is for C/F selection
- Supplied protector sheath and instructions
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/- (-20 to +100°C), +/- (others)
Battery: One PL-13 1.5 volt battery require – order separately

P1302 Waterproof Digital T-Bar Stem Thermometer
SKU: N/AFeatures:
- Digital indication. Two push buttons with splash proof membrane
- On/Off and Test/Data hold
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/-1 (-20 to +100°C), +/-2 (others)
Battery: One PL-13 1.5 volt battery required-order separately

P1306 Hygrometer Min/Max
SKU: N/AA portable battery powered combined digital temperature and relative humidity meter.
Temperature range: -10 to +60°C/F
Resolution: 0.1/1%RH
Humidity Range: 30 to 90% RH
Accuracy: +/-1°C +/-3%RH at 25%

Zeal P1305 Digital Max/Min Memory Thermometer
SKU: N/AThe min/max button is used to access the memory of each sensor. After reading the memorised values the user has the option to reset the memory. This model is a precision device for measuring the interior and exterior temperatures as well as the maximum and minimum.
Temperature: 10°C to +60°C / + 14 + 140°F for inside and -50 to 70°C / -58 +158°F for outside
Accuracy: Inside +/-1 outside +/-1.5°F
Features include:
- a wall mounting bracket and flip-out desk stand, and 3 metre cable
- each instrument is supplied with wall bracket and instructions
- battery enclosed

Zeal P1304 The Digital Alarm Thermometer
SKU: N/AFor measuring temperature variations, with pre-set temperature function and built in alarm. This model also incorporates the max/min memory function, but has the additional feature of programmeable min/max alarm for the out sensor.
Temperature range: -50 to +70°C. -58 to 185°F
Resolution: 0.1°C, 0.1°F
Accuracy: +/-1°C, +/-1.5°F

Education – Wall Thermometer
SKU: N/A
Code | Printing |
P0511 | Green Issues. -30/+50°C & °F |
P0511/P | Plain Front. -30/+50°C & °F |
P0512 | Green Issues. -30/+50°C |
P0513 | Classroom. -10/+35°C |
P0513/D | Dinosaurs. -10/+35°C |

Slimline Pattern
This general purpose Max-min wall mounting thermometer offers a low cost instrument in an attractive style. Housed in a white plastic case printed with a white cover with concealed magnet at the lower part of the case enables the user to reset by simply sliding the over up and down, thus drawing the indices back to the mercury column. 210 x 50mm diameter. Supplied in cardboard carton.
Code | Range |
P3010 | -30/+50°C |
P3011 | -30/+50°C & -20/+120°F |

High Accuracy Pattern
A short range high accuracy model with computer room and office environmental conditions in mind this white case instrument offers an accuracy of +/-0.25% @ 20°C. Wall mounting. 210 x 65mm.
- Code P3020 – Range 0-40°C

Giant Max-Min Thermometers
Similar in design to the ‘Slimline’ pattern this thermometer is probably the largest max-min available. Reset is again by use of the sliding cover at the lower part of the case. With dimensions of 513mm x 110mm it is very easy to read from a distance and is especially ideal for offices, factories, classrooms and gardens.
Code | Range |
P3030 | -30/+50°C |
P3031 | -30/+50°C & -20/+120°F |

Sixes Pattern Max-Min Thermometer
The case incorporates a lid and has a protection cover on the lower part, together with a hanging loop for the reset magnet. Supplied complete mounting screws. 260mm high x 60mm wide.
Code | Range |
P3000 | -30/+50°C |
P3001 | -30/+50°C & -20/+120°F |
P3002 | -10/100°C |
The push button version is a very similar instrument which has proved most popular in some markets. Similar in both design and construction a button situated in a centre of the scale enables the user to reset the indices without the need for a magnet.
Code | Range |
P3003 | -30/+50°C |
P3004 | -30/+50°C & -20/+120°F |

P1301 Pen-Type Stirring Stem Thermometer
The stainless steel probe is 125mm long with sensor located 10mm from the end. The protective sheath is made of Hi grade ABS plastic, with a vented end so the instrument can be used for stirring whilst taking the temperature. The probe protection sheath can also be clipped to the thermometer head to be used as a handle extension.
Features:
- Digital indication. Two push buttons with splash proof membrane.
- On/Off and Test/Data hold
- A third push button on rear is for C/F selection
- Supplied protector sheath and instructions
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/- (-20 to +100°C), +/- (others)
Battery: One PL-13 1.5 volt battery require – order separately

P1302 Waterproof Digital T-Bar Stem Thermometer
Features:
- Digital indication. Two push buttons with splash proof membrane
- On/Off and Test/Data hold
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/-1 (-20 to +100°C), +/-2 (others)
Battery: One PL-13 1.5 volt battery required-order separately

P1306 Hygrometer Min/Max
A portable battery powered combined digital temperature and relative humidity meter.
Temperature range: -10 to +60°C/F
Resolution: 0.1/1%RH
Humidity Range: 30 to 90% RH
Accuracy: +/-1°C +/-3%RH at 25%

Zeal P1305 Digital Max/Min Memory Thermometer
The min/max button is used to access the memory of each sensor. After reading the memorised values the user has the option to reset the memory. This model is a precision device for measuring the interior and exterior temperatures as well as the maximum and minimum.
Temperature: 10°C to +60°C / + 14 + 140°F for inside and -50 to 70°C / -58 +158°F for outside
Accuracy: Inside +/-1 outside +/-1.5°F
Features include:
- a wall mounting bracket and flip-out desk stand, and 3 metre cable
- each instrument is supplied with wall bracket and instructions
- battery enclosed

Zeal P1304 The Digital Alarm Thermometer
For measuring temperature variations, with pre-set temperature function and built in alarm. This model also incorporates the max/min memory function, but has the additional feature of programmeable min/max alarm for the out sensor.
Temperature range: -50 to +70°C. -58 to 185°F
Resolution: 0.1°C, 0.1°F
Accuracy: +/-1°C, +/-1.5°F

Education – Wall Thermometer
Code | Printing |
P0511 | Green Issues. -30/+50°C & °F |
P0511/P | Plain Front. -30/+50°C & °F |
P0512 | Green Issues. -30/+50°C |
P0513 | Classroom. -10/+35°C |
P0513/D | Dinosaurs. -10/+35°C |

Slimline Pattern
This general purpose Max-min wall mounting thermometer offers a low cost instrument in an attractive style. Housed in a white plastic case printed with a white cover with concealed magnet at the lower part of the case enables the user to reset by simply sliding the over up and down, thus drawing the indices back to the mercury column. 210 x 50mm diameter. Supplied in cardboard carton.
Code | Range |
P3010 | -30/+50°C |
P3011 | -30/+50°C & -20/+120°F |

High Accuracy Pattern
A short range high accuracy model with computer room and office environmental conditions in mind this white case instrument offers an accuracy of +/-0.25% @ 20°C. Wall mounting. 210 x 65mm.
- Code P3020 – Range 0-40°C

Giant Max-Min Thermometers
Similar in design to the ‘Slimline’ pattern this thermometer is probably the largest max-min available. Reset is again by use of the sliding cover at the lower part of the case. With dimensions of 513mm x 110mm it is very easy to read from a distance and is especially ideal for offices, factories, classrooms and gardens.
Code | Range |
P3030 | -30/+50°C |
P3031 | -30/+50°C & -20/+120°F |

Sixes Pattern Max-Min Thermometer
The case incorporates a lid and has a protection cover on the lower part, together with a hanging loop for the reset magnet. Supplied complete mounting screws. 260mm high x 60mm wide.
Code | Range |
P3000 | -30/+50°C |
P3001 | -30/+50°C & -20/+120°F |
P3002 | -10/100°C |
The push button version is a very similar instrument which has proved most popular in some markets. Similar in both design and construction a button situated in a centre of the scale enables the user to reset the indices without the need for a magnet.
Code | Range |
P3003 | -30/+50°C |
P3004 | -30/+50°C & -20/+120°F |

P1301 Pen-Type Stirring Stem Thermometer
The stainless steel probe is 125mm long with sensor located 10mm from the end. The protective sheath is made of Hi grade ABS plastic, with a vented end so the instrument can be used for stirring whilst taking the temperature. The probe protection sheath can also be clipped to the thermometer head to be used as a handle extension.
Features:
- Digital indication. Two push buttons with splash proof membrane.
- On/Off and Test/Data hold
- A third push button on rear is for C/F selection
- Supplied protector sheath and instructions
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/- (-20 to +100°C), +/- (others)
Battery: One PL-13 1.5 volt battery require – order separately

P1302 Waterproof Digital T-Bar Stem Thermometer
Features:
- Digital indication. Two push buttons with splash proof membrane
- On/Off and Test/Data hold
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/-1 (-20 to +100°C), +/-2 (others)
Battery: One PL-13 1.5 volt battery required-order separately

P1306 Hygrometer Min/Max
A portable battery powered combined digital temperature and relative humidity meter.
Temperature range: -10 to +60°C/F
Resolution: 0.1/1%RH
Humidity Range: 30 to 90% RH
Accuracy: +/-1°C +/-3%RH at 25%

Zeal P1305 Digital Max/Min Memory Thermometer
The min/max button is used to access the memory of each sensor. After reading the memorised values the user has the option to reset the memory. This model is a precision device for measuring the interior and exterior temperatures as well as the maximum and minimum.
Temperature: 10°C to +60°C / + 14 + 140°F for inside and -50 to 70°C / -58 +158°F for outside
Accuracy: Inside +/-1 outside +/-1.5°F
Features include:
- a wall mounting bracket and flip-out desk stand, and 3 metre cable
- each instrument is supplied with wall bracket and instructions
- battery enclosed

Zeal P1304 The Digital Alarm Thermometer
For measuring temperature variations, with pre-set temperature function and built in alarm. This model also incorporates the max/min memory function, but has the additional feature of programmeable min/max alarm for the out sensor.
Temperature range: -50 to +70°C. -58 to 185°F
Resolution: 0.1°C, 0.1°F
Accuracy: +/-1°C, +/-1.5°F

Education – Wall Thermometer
Code | Printing |
P0511 | Green Issues. -30/+50°C & °F |
P0511/P | Plain Front. -30/+50°C & °F |
P0512 | Green Issues. -30/+50°C |
P0513 | Classroom. -10/+35°C |
P0513/D | Dinosaurs. -10/+35°C |

Slimline Pattern
This general purpose Max-min wall mounting thermometer offers a low cost instrument in an attractive style. Housed in a white plastic case printed with a white cover with concealed magnet at the lower part of the case enables the user to reset by simply sliding the over up and down, thus drawing the indices back to the mercury column. 210 x 50mm diameter. Supplied in cardboard carton.
Code | Range |
P3010 | -30/+50°C |
P3011 | -30/+50°C & -20/+120°F |

High Accuracy Pattern
A short range high accuracy model with computer room and office environmental conditions in mind this white case instrument offers an accuracy of +/-0.25% @ 20°C. Wall mounting. 210 x 65mm.
- Code P3020 – Range 0-40°C

Giant Max-Min Thermometers
Similar in design to the ‘Slimline’ pattern this thermometer is probably the largest max-min available. Reset is again by use of the sliding cover at the lower part of the case. With dimensions of 513mm x 110mm it is very easy to read from a distance and is especially ideal for offices, factories, classrooms and gardens.
Code | Range |
P3030 | -30/+50°C |
P3031 | -30/+50°C & -20/+120°F |

Sixes Pattern Max-Min Thermometer
The case incorporates a lid and has a protection cover on the lower part, together with a hanging loop for the reset magnet. Supplied complete mounting screws. 260mm high x 60mm wide.
Code | Range |
P3000 | -30/+50°C |
P3001 | -30/+50°C & -20/+120°F |
P3002 | -10/100°C |
The push button version is a very similar instrument which has proved most popular in some markets. Similar in both design and construction a button situated in a centre of the scale enables the user to reset the indices without the need for a magnet.
Code | Range |
P3003 | -30/+50°C |
P3004 | -30/+50°C & -20/+120°F |

P1301 Pen-Type Stirring Stem Thermometer
The stainless steel probe is 125mm long with sensor located 10mm from the end. The protective sheath is made of Hi grade ABS plastic, with a vented end so the instrument can be used for stirring whilst taking the temperature. The probe protection sheath can also be clipped to the thermometer head to be used as a handle extension.
Features:
- Digital indication. Two push buttons with splash proof membrane.
- On/Off and Test/Data hold
- A third push button on rear is for C/F selection
- Supplied protector sheath and instructions
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/- (-20 to +100°C), +/- (others)
Battery: One PL-13 1.5 volt battery require – order separately

P1302 Waterproof Digital T-Bar Stem Thermometer
Features:
- Digital indication. Two push buttons with splash proof membrane
- On/Off and Test/Data hold
Range: -50 to +150°C
Resolution: 0.1°C
Accuracy: +/-1 (-20 to +100°C), +/-2 (others)
Battery: One PL-13 1.5 volt battery required-order separately

P1306 Hygrometer Min/Max
A portable battery powered combined digital temperature and relative humidity meter.
Temperature range: -10 to +60°C/F
Resolution: 0.1/1%RH
Humidity Range: 30 to 90% RH
Accuracy: +/-1°C +/-3%RH at 25%

Zeal P1305 Digital Max/Min Memory Thermometer
The min/max button is used to access the memory of each sensor. After reading the memorised values the user has the option to reset the memory. This model is a precision device for measuring the interior and exterior temperatures as well as the maximum and minimum.
Temperature: 10°C to +60°C / + 14 + 140°F for inside and -50 to 70°C / -58 +158°F for outside
Accuracy: Inside +/-1 outside +/-1.5°F
Features include:
- a wall mounting bracket and flip-out desk stand, and 3 metre cable
- each instrument is supplied with wall bracket and instructions
- battery enclosed

Zeal P1304 The Digital Alarm Thermometer
For measuring temperature variations, with pre-set temperature function and built in alarm. This model also incorporates the max/min memory function, but has the additional feature of programmeable min/max alarm for the out sensor.
Temperature range: -50 to +70°C. -58 to 185°F
Resolution: 0.1°C, 0.1°F
Accuracy: +/-1°C, +/-1.5°F

Education – Wall Thermometer
Code | Printing |
P0511 | Green Issues. -30/+50°C & °F |
P0511/P | Plain Front. -30/+50°C & °F |
P0512 | Green Issues. -30/+50°C |
P0513 | Classroom. -10/+35°C |
P0513/D | Dinosaurs. -10/+35°C |